top of page

Aluminium Roof Lanterns: Why Aluminium and What to Specify

Oct 27
4 min read
White-framed pyramid roof lantern set in a flat plastered ceiling with downlights above a bright garden room


Aluminium roof lanterns are the standard choice for a flat-roofed extension because aluminium carries large panes of glass on the slimmest frame of any material, does not move with the seasons, and takes a powder-coated finish that needs no maintenance beyond washing. A well-made aluminium lantern has a thermal break through every bar, so the frame is not a cold bridge, and it can be finished in any colour inside and out. Where an older lantern was a heavy timber or a bulky white frame, a modern one is close to all glass.


We supply and fit slim-frame aluminium roof lanterns across the UK, and this is what we look for in one.


Why choose an aluminium roof lantern?

Strength for the sightline is the first reason. A lantern is a small glazed roof, and every bar in it is a line across the sky. Aluminium's strength allows those bars to be narrow while carrying double or triple glazed units over a long span, so the view through the lantern is mostly glass rather than frame.


Stability is the second. Timber lanterns move with humidity, which stresses seals and glass over time. Aluminium does not, so the glazing seals stay where they were set and the lantern stays weathertight without attention.


Finish is the third. Powder coating gives a hard, colour-fast surface in any RAL shade, including dual colour so the outside matches the roof and the inside matches the ceiling. It needs washing, nothing more, for the life of the lantern.


The one caveat is thermal performance, and it is the difference between a good aluminium lantern and a poor one. Aluminium conducts heat, so the frame must have a polyamide thermal break separating the inner and outer faces. Without it the bars run cold, condensation forms on them in winter and the room loses heat through the frame. Every lantern we fit is thermally broken.


How does aluminium compare with other lantern frames?

  • Aluminium: the slimmest bars for a given span, no movement, a powder-coated finish in any colour and almost no maintenance. It must be thermally broken.

  • Hardwood: warmer to look at and right on a traditional orangery, but the bars are deeper for the same span and the timber needs periodic refinishing outside.

  • Standard frames: usually the cheapest, with chunky bars and a limited colour range. They suit a budget roof rather than a room where the lantern is the feature.


Where does an aluminium roof lantern work best?

Kitchen extensions are the classic case. A single-storey rear extension with a flat roof puts the kitchen under a solid ceiling, and a lantern over the island or the dining table brings daylight into the centre of the plan where windows cannot reach.


Pyramid roof lantern in a flat ceiling above a room with black aluminium full-height windows onto the garden


Orangeries are the second. The lantern sits on a flat roof with a deep fascia around it, and on a hardwood orangery we often pair the hardwood-framed room with an aluminium lantern, because the span is where aluminium's strength counts most. On our glass box extensions a flush rooflight is usually the better fit, with a raised lantern kept for rooms that want height and a focal point.


What sizes do aluminium roof lanterns come in?

Lanterns are made to measure, so the question is really what proportion suits the room. As a rule of thumb, a lantern's glazed area is about a quarter to a third of the ceiling it sits in, adjusted for orientation and room use. Long narrow rooms take a long narrow lantern or a run of two; square rooms take a square or a pyramid form.


Span is limited by the glass rather than the frame, because larger panes need thicker, heavier units, and beyond a certain width a ridge beam or intermediate bar is introduced. Standard sizes and what drives the price are set out in our guide to roof lantern cost and sizes.


What glazing should an aluminium lantern have?

Double glazing with a low-emissivity coating is the baseline. Solar control glass is worth specifying on any lantern facing south or west, because a lantern sits in full sun for most of the day and, without it, the room below can overheat. Self-cleaning glass earns its cost on a lantern more than anywhere else on a house, because the glass is hard to reach and always facing the sky. Triple glazing suits a room used as full-time living space, where the heating budget matters more than the marginal cost of the unit, and is worth raising early because it changes the weight the frame has to carry. Low-iron glass removes the faint green tint on thick units and is worth considering where the lantern is a feature.


How is an aluminium roof lantern fitted?

The lantern sits on an upstand, a timber or masonry kerb built up from the flat roof, which is finished with the roofing membrane and provides the level base and the drainage fall. The lantern is fixed to the upstand, sealed and flashed, and the glazing is fitted last. On a new extension the upstand is built into the roof; on an existing flat roof an opening is cut, the joists are trimmed with new timbers to carry the load around the hole, and the upstand is built onto them. A structural check is needed on any existing roof before an opening is cut, which is why our guide to roof lanterns for flat roofs spends time on the upstand.


Integrated LED lighting in the frame is fitted at this stage if it is wanted, and so is any sensor-controlled ventilation.


Aluminium roof lanterns questions, answered

Do aluminium roof lanterns get condensation?

A thermally broken lantern with good glazing should not. Condensation on the bars is the sign of an unbroken frame or a room with poor ventilation.


What colour should a roof lantern be?

Anything, since it is powder coated. Anthracite grey and black are the most requested outside; white or a colour matched to the ceiling inside makes the frame recede.


Does a roof lantern need planning permission?

Often it does. In England a rooflight added to an existing roof may project no more than 150mm from the roof plane, and a lantern on an upstand normally exceeds that, so check with the council before ordering. Building regulations apply to the opening and the glazing either way.


Talk to our design team

If you are planning a lantern, we are happy to advise on size and glazing for your room.

 
 
Winter Garden - an award wining glass extension that lights up the courtyard and invites y

BEGIN Your project

Let us design something exceptional

Tell us a little about your home and we will be in touch to arrange your design consultation, at the showroom or at your property.

​

Prefer to talk?

Call us on 0113 518 3766

or email us at info@glasshousearchitecture.co.uk

PROJECT CATEGORY

No obligation. We aim to reply within one working day.

bottom of page