top of page

Aluminium Bay Windows: How to Replace a Bay Without Losing Its Character

Nov 2
4 min read
Stone Victorian house with a white canted bay window and green front door beside a painted timber conservatory


Aluminium bay windows are bay or bow windows, the projecting windows on the front of most Victorian and Edwardian houses, remade in slim thermally broken aluminium. A bay is the one window on the house that carries structure as well as glass, so replacing it is a design and engineering job rather than a swap. Done well, an aluminium bay keeps the proportions the house was built with, sheds the maintenance of painted timber, and takes modern glazing. This post explains what is involved.


Bay or bow: what is the difference?

A bay window projects from the wall in flat sections joined at angles; a bow projects in a gentle curve. The common shapes:


  • Splayed bay: a front light with two angled sides, usually at 45 degrees; the classic Victorian bay.

  • Square (box) bay: sides at 90 degrees to the wall, common on Edwardian and later houses.

  • Shallow or wide bay: a wider front light with short returns, often Edwardian.

  • Bow: four or more narrow lights set on a curve; rarer and later.


All of them can be made in aluminium.


The lights of a bay are usually casements or sashes. On our aluminium windows and doors the casement, tilt-and-turn and fixed styles share one slim, thermally broken frame system, so a bay can be built from any combination, made to measure to the exact plan of the existing bay.


Why does a bay need structural thought?

In many older houses the bay's corner posts carry the bay roof and, on a two-storey bay, the floor and window above. Timber windows were often part of that structure. When the windows come out, something has to carry the load. The answer is a structural corner post, usually a steel or reinforced aluminium bay pole, fitted at each angle and taking the weight down to the sill or the base wall. The new aluminium frames are then fixed between the poles.


A survey establishes what the existing bay is doing structurally. Skipping that step is how a replaced bay ends up with a sagging roof or cracked render a year later. How much of that work sits inside a bay replacement varies from house to house, so it is worth agreeing at survey stage whether the corner posts, the bay roof and the sill work are part of the job or the frames alone.


Keeping the proportions right

The mistake on replacement bays is wider frames: heavy mullions, less glass, and a house that looks as though it has narrowed its eyes. Slim aluminium reverses that, so the glass area matches or exceeds the original. Where the original had glazing bars, such as a divided top light over a plain lower pane, applied bars reproduce them. For most brick bays a plain flush casement is the right choice; our guide to aluminium casement windows explains why.


Opening lights, ventilation and escape

A bay usually has opening lights in the side faces and sometimes in the front. Side-hung casements are the usual choice; top-hung vents above fixed panes suit a bay where the sill is low and a large opening sash would be awkward. On a first-floor bay in a bedroom, one light must give an escape opening of the size Building Regulations require, and that is often the front light. Multi-point locking is standard on every light we install, and restrictors can be fitted to upper-floor casements.


Roof, sill and finishing

The bay roof, whether slate, lead or a flat felt or fibreglass roof, is either retained and re-flashed to the new frames or renewed at the same time. The sill is a run of aluminium or stone below the frames, with a drip to throw water clear of the wall. Inside, the window board is renewed and reveals are made good. These are the details that decide whether a bay looks replaced or looks original; they should be in the quotation, not left to the decorator.


Glazing and finish

Low-emissivity double glazing is standard. On a street-facing bay, laminated lower panes improve security and cut traffic noise. Finish is a wide RAL range with dual colour standard: black or anthracite outside with a white interior is the usual choice on a period house.


Planning and regulations

In England, replacing a bay like for like in a house that is not listed and not in a conservation area does not need planning permission. In a conservation area the council may control materials and appearance, and a listed house needs listed building consent. Building Regulations apply to the glazing energy standard, safety glass at low level, and the escape opening on upper floors; if the corner posts are being replaced, the structural work is also subject to regulations.


How much do aluminium bay windows cost?

A three-light bay costs more than three separate windows, because of the corner posts, roof and sill work and the survey. Our guide to aluminium windows cost explains what drives the figure.


Aluminium bay windows questions, answered

Can I replace just the windows in my bay and keep the roof?

Often, yes, if the roof and posts are sound. The survey decides. Where the timber frames are carrying the roof, structural posts are needed when they come out.


Will an aluminium bay look modern on a Victorian house?

Not if it is proportioned correctly. Slim frames, the original opening pattern and a flush casement give a bay that reads as original from the pavement.


Can a bay be made bigger or deeper?

Enlarging a bay is an extension in planning terms and changes the structure. It is possible, but it is a different project from a replacement.


How long does a bay replacement take?

Longer than a standard window, because of the structural and roofing work. Most single-storey bays are completed within a few days on site.


Talk to our design team

If your bay is the tired one on the street, it is also the one that repays doing properly. We are glad to survey it and say what it needs.

 
 
Winter Garden - an award wining glass extension that lights up the courtyard and invites y

BEGIN Your project

Let us design something exceptional

Tell us a little about your home and we will be in touch to arrange your design consultation, at the showroom or at your property.

​

Prefer to talk?

Call us on 0113 518 3766

or email us at info@glasshousearchitecture.co.uk

PROJECT CATEGORY

No obligation. We aim to reply within one working day.

bottom of page